A and A Logo
Magnetic Coolant Separators

Horizbar

60 GPM Coolant Separator
AG-10060 60 GPM Model
with 3 Phase Continuous Duty Motor

Horizbar
A and A Magnetic Coolant Separators are designed to extend the life of cutting tools, grinding wheels and pumps. Cleaner coolant results in reduced machine downtime and lower operating costs. Seven standard models are available to adapt the the separator to specific requirements. Special system designs are available on request.

  1. Contaminated coolant enters separator and contaminants are attracted to the magnetic drum.
  2. Scraper blade, with wringer action, removes sludge from the magnetic drum.
    Scraper blade design reduces sludge build up on chute assembly and prevents magnetic interference from the drum.
  3. Cleaned coolant is directed into holding tank for recirculation.
BENEFITS:
  • Cleaner coolant with a longer service life
  • Lengthened tool life
  • Machine accuracy maintained
  • Reduced machine downtime
  • Lower cost per work piece
  • Low initial cost
  • Virtually no maintenance costs
  • No indexing required to obtain maximum filtration of non-magnetic particles in coolant
  • Increased production
  • Uniform part finish
  • Reduced pump and machine wear
  • No wear or baffle adjustment required due to flow variations
Features:
  • Fully automatic operation
  • Removes up to 99% of magnetic material
  • Can be used on new or existing machines
  • Stainless steel housing
  • Self adjusting scraper blade with "wringer" action for up to 50% dryer swarf discharge
  • Easy installation in restricted floor space areas
  • 100 volt drive motor standard option or 220/440 volt, 3 phase, 60 HZ standard option for additional cost
  • Models available from 5 to 120 GPM
  • Inlet height from 6" to 24"
  • Permanent magnetic power
  • Meets all O.S.H.A. requirements
  • One year limited warranty

Dimension in Inches
GPMMODELAB
5AG 100054-3/82-7/8
20AG 1002010-1/87
40AG 1004020-1/87
60AG 1006030-1/819
80AG 1008040-1/819
100AG 1010050-1/819
120AG 1012060-1/820

Animated New180 Gallon Per Minute Model
Call us or request info below for specifications.
180 GPM Coolant Separator

Horizbar
A and A Magnetics Inc.
P. O. Box 1427
Woodstock, Illinois 60098

    Phone - 815-338-6054
Toll Free - 888-605-6054 		  Fax - 
 815-338-8590 		  Email - 
 sales@aamag.com 

We welcome any comments or questions you may have!

Please enter your CORRECT Email address

Please type your question or comment below.

If you would like our sales department to contact you please fill out the following.
(This information is considered confidential and will not be forwarded to third parties.)
Your name:

Company:

Phone Number:

A and A Magnetics HOME PAGE