A and A Logo
Point of Use Water Heater Supports

Horizbar

  More and more local building codes are requiring that point of use water heater installations be provided with a means to drain water from a potential leak or safety valve opening into the building's plumbing system.
  A and A Magnetics has the answer to this problem for you with 2 different styles of water heater mounts.
  The wall mount unit comes equipped with welded on brackets and gussets as well as 2 rings for supporting the front of heavier water heaters with 1/2 inch diameter threaded rods.

  The suspended style has 4 rings for hanging from the ceiling with 1/2 inch diameter threaded rods. This unit may also be placed on an existing shelf.
  Both styles are provided with a welded on 1 inch internally threaded pipe coupling for connection to black iron or PVC pipe.
  While other sizes are availible on request, standard sizes are 20 X 20 and 30 X 30 inches.
  These units will save you fabrication time and money in field installations and can be shipped by UPS to any location in the continental United States.

Horizbar
A and A Magnetics Inc.
P. O. Box 1427
Woodstock, Illinois 60098

    Phone - 815-338-6054
Toll Free - 888-605-6054 		  Fax - 
 815-338-8590 		  Email - 
 sales@aamag.com 

We welcome any comments or questions you may have!

Please enter your CORRECT Email address

Please type your question or comment below.

If you would like our sales department to contact you please fill out the following.
(This information is considered confidential and will not be forwarded to third parties.)
Your name:

Company:

Phone Number:

A and A Magnetics HOME PAGE