Magnetic Hump Separators
A&A Magnetic Hump Assemblies were designed to direct product and contaminant flow into the magnetic fields of plate separators. The deflected flow pattern helps to break up clumps of material, providing maximum protection against entrapped contaminants. The hump separator is used where heavy, loose flowing materials such as fibers, chemicals, clay products, grain, feed and sand are conveyed in vertical, down gravity flow chutes. Whether installed vertically or horizontally, falling material strikes directly against the first magnetic plate and the subsequent change of direction permits the second magnet to remove any remaining tramp iron. The two Magnetic plates are hinged to swing out for fast, easy cleaning. Optional features include spouting adapters, all stainless steel construction and portholes for observation.
|
Hump Size (width)
|
Duct Size Dia.
|
Length (A)
|
Opening Height ID (B)
|
Flange Height OD (C)
|
Flange Height ID (D)
|
Flange Width OD (E)
|
OA Width
(F)
|
|---|---|---|---|---|---|---|---|
|
8
|
6
|
22-5/8
|
5-13/16
|
8-13/16
|
9-3/16
|
12-3/16
|
14-13/16
|
|
10
|
8
|
26-5/8
|
7-1/4
|
10-1/4
|
11-1/8
|
14-1/8
|
16-3/4
|
|
12
|
9
|
26-5/8
|
7-1/4
|
10-1/4
|
13-1/8
|
16-1/8
|
16-3/4
|
|
14
|
10
|
26-5/8
|
7-1/4
|
10-1/4
|
15-1/8
|
18-1/8
|
16-3/4
|
|
20
|
12
|
26-5/8
|
7-1/4
|
10-1/4
|
21-1/8
|
24-1/8
|
16-3/4
|
|
26
|
14
|
29
|
7-3/4
|
10-3/4
|
27-1/8
|
30-1/8
|
18-3/8
|
|
32
|
16
|
29
|
7-3/4
|
10-3/4
|
33-1/8
|
36-1/8
|
18-3/8
|
DIMENSIONS IN INCHES
